The Camtech warranty is 90 Days (3 months).   Warranty is NOT TRANSFERABLE  to a second owner. Warranty  is voided if equipment is exposed to sand, impact, water, tampering or any other form of abuse.   When an item (that has been repaired by Camtech) is sold to a second owner, the warranty is cancelled.

No warranty if OM bodies are used with "soft  release" buttons.  These add-ons (not made by Olympus) change the design of the camera, raising the profile of the release button so high that if anything hits the top of the body, the release absorbs all the force and causes damage to multiple levers inside the body.  Use a "soft release" button at your own risk.   They don't always cause damage, but sometimes they do.   Please see:  here

Cameras that fail during the warranty period MUST be received by Camtech while the warranty is in effect, for that camera to re-examined and repaired under the warranty. One customer sent a camera back 2.5 YEARS later expecting a "no charge" repair simply because he told me about the problem 2 years earlier. A camera will be redone under warranty ONLY if it is received while the warranty is still in effect.  ALL shipping costs to CPS are the customers responsibility.   Warranty includes return shipping to the original invoiced customer only and only within the United States.  Pen F, FV, FT repair warrantees are limited to areas worked on..   You are required to enclose a copy of your repair invoice with anything returned for service under the warranty.
 

A redo or rework does not start a new 90 day month warranty. Rework warranty is time remaining on original warranty or 30 days, whichever is greater.  NO WARRANTY OF ANY KIND ON NiMH BATTERY CLUSTERS IN M15V CONTROL PACKS.

The Camtech warranty is cancelled if the item is worked on by anyone other than Camtech (CPS, Inc.) during the warranty period.  That would be tampering.  Home testing is not accurate and is meaningless.  Comparing overhauled equipment to other camera meters is not binding.

 

Repair part sales carry no warranty of any kind. Purchase of camera repair parts is at the end users own risk. Repair skills vary widely from good to none. I have no control how parts may be handled by well meaning end users. No warranty on any reapir part sales,  No refunds, exchanges, returns, credits on repair parts, EVER.  Parts do not come with directions. .

 

 

Warranty does not cover the circuit board in ANY OM item or XA body ( no longer available).  Warranty also does not cover possible  failure of mechanical meter movements in any Olympus OM, Pen FT or XA  body..  Warranty not honored if cameras are used with the wrong batteries (ex. OM-2/2N  must use silver oxide 1.55V cells.  A76, LR44 alkaline & CR1/3N lithium = Wrong batteries).

Above specs subject to change without notice. 

Items not covered by the warranty:  md cap, hot shoes, ttl connectors, batteries, camera cases, straps.  Also not covered:  prism damage that may appear, leather that may curl up, rewind knob that may unscrew because customer rewound film in the wrong direction  (and all various  parts that could unscrew, fall off camera and become lost).  Also not covered:  small rewind knob on handle of OM-3/3Ti/4/4T/4Ti may unscrew and fall off, eyepiece glass on same bodies will break and fall out if pressed, burned out battery clusters in M15V Control Pack 1 and 2 from overcharging : not covered by warranty.

Warranty is limited to areas worked on and is completely time based, and runs from the SHIP DATE.   If camera is put away for 90 days and is not used, warranty will run out and end. 

Insides of some cameras (film chamber) are FILTHY.  No warranty regarding possible film scratching. 

While custom leathers are very nice, no warranty if they peel up from the body. I did not make them and the self-stick layer is an unknown entity. 

Pen F/FT/FV sprockets that fail (symptom: film will not wind, sprocket just spins) not covered by the warranty. 

If a defective flash (like T-32, T-20) is used on ANY electronic OM Body,  and it blows out the camera circuit(s), repair is not covered by the warranty and is considered misuse or abuse.  A properly operating flash puts 3-5V through the trigger circuit / ttl circuit of the camera.  When a flash explodes internally, it could surge over 100V through these circuits, potentially destroying them.